Pentax AF-360FGZ Operating Manual page 26

Auto zoom electronic flash unit
Hide thumbs Also See for AF-360FGZ:
Table of Contents

Advertisement

00_AF360FGZ.book Page 24 Tuesday, June 13, 2006 12:09 PM
nTTL Auto Flash
Refer to page 22 for the features and conditions of use
of this flash mode.
24
Procedure
1
Turn on the flash unit.
2
Press the flash mode button (MODE) until (TTL)
is displayed on the LCD panel.
3
Set the sync mode switch to leading curtain sync
(
), trailing curtain sync (
contrast-control (
subject. (Refer to page 29.)
4
Set the zoom position. (The setting method
differs according to your camera and lens. Refer
to page 18.)
5
Confirm that the subject is within the effective
flash range and the ready lamp is lit. Then take a
picture.
l In the following cameras, if the correct flash
output is obtained, the flash mode indicator and
( ) in the viewfinder will blink.
35 mm single lens reflex cameras
SF10, 672, 645N2, 645N, 645, LX, Super A/
Super Program
For details, refer to "Auto Check Display" on
page 9.
), or
), according to the
except for SF7/

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents