OCAM M2 User Manual page 7

Step 4. Enter the camera list and choose " Add My Camera".
If no OCam device is detected, please quit the APP and go back to Step 2.
Note that for the iOS devices, please click home bu on to exit APP.
Step 5. Please set the admin password and then click "Next".
P.4
Camera list
(Please choose the camera)
Add My Camera Connect Other Camera
?
Info Rescan Camera
Quick Start Guide
!
Didn't detect any OCam
Exit OCam APP and go to Wifi setting
page on your smart phone/tablet,
enable the WiFi and follow the OCam
quick start guide in the box. Re-open
OCam App after your smart phone/
tablet connect to the OCam.
Exit App
Setting Admin Password
Admin
Please set the admin password
Re-enter the admin password
Show password
Admin password is required when doing
advanced settings
Back Main Next