2. Se ng up the Camera
2.1 To put the camera on the table, please follow the instruc on below:
Insert the holder into
1
the holder socket
2.2 To fix the camera on the wall, please follow the instruc on below:
A ach the wall mount
1
to your wall or ceiling
using the screws included
in the box.
2.3 Connect the product to power (shown below), and wait un l the
indicator light goes flashing.
If you need to do recording, please insert the Micro SD card.
P.2
Make sure the bo om
2
of OCam into the right
posi on
Mount your camera
2
by fi ng the base into
the wall mount.
Complete
3
Further Explana on: a ach the
plas c anchor to your cement
wall before you mount the camera
on a wall.
(Only used when the wall are hard
like the cement wall)
Mi
Micro SD 卡