Factory Default Recovery; Firmware Update - OCAM M2 User Manual

8. Factory Default Recovery

Please use a thin needle to press in the RESET hole in the back of OCam for
8 seconds and release. There will be beep sound as recovering the factory
default.

9. Firmware Update

Please use a thin needle to press in the RESET hole in the back of OCam for
8 seconds and release. There will be beep sound as recovering the factory
default.
Installa on steps as below
Step 1. Download the updated version of firmware to the Micro SD card.
(h p://www.ocam-online.com/download.php)
Step 2. Connect the OCam to power.
Step 3. Insert Micro SD card into the memory card slot of OCam.
Step 4. The OCam will update automa cally and using voice prompt to inform
the update comple on.
Step 5. Please remove the memory card once the update is completed.
P.19
OCam-M2
S/N:145200030
FCC ID:
UID:AAAABBBBCCCCDDDDEEEE
SSID:OCAM-X1PP78
Reset bu on
UID UID UID UID UID
2AA8WOCAM-M1