Advertisement
3/4
Quick Installation Guide
Read the license agreement, click [I ac-
Notes on the Installation
cept the agreement.], and then click
If the message "Digital Signature Not Found" or the
[Next >].
[Software Installation] or [Hardware Installation] dia-
log box appears:
1. Click [Yes] or [Continue Anyway] to continue the
installation.
If the [Found New Hardware Wizard] dialog box ap-
pears:
1. Click [Install from a list or specific location (Ad-
vanced)], and then click [Next >].
2. Click [Include this location in the search], and then
click [Browse].
3. Browse to "DRIVERS" on the CD-ROM, and then
Check that the power of the machine is
click [OK]. Select the folder appropriate for your
off, and then click [Next >].
operating system.
Be sure to clear the [Search remove media (floppy, CD-
ROM...)] check box.
For details about the files stored on the CD-ROM la-
belled "Drivers, Manual & Utilities", see "Software
on the CD-ROM", User Guide.
Start Windows, and insert the provided
"Drivers, Manual & Utilities" CD-
ROM into the CD-ROM drive.
Quit all applications currently running.
Check again that the power of the ma-
When you start Windows, the "Add New Hardware
chine is off, and then click [Next >].
Wizard" may appear. If this happens, click [Cancel].
Check again that the power is off.
Select a language for the interface, and
then click [OK].
Check that the dialog box below appears.
The following languages are available:
Dansk (Danish), Deutsch (German), English (English),
Espanol (Spanish), Francais (French), Italiano (Italian),
Nederlands (Dutch), Norsk (Norwegian), Portugues
(Portuguese), Svenska (Swedish)
If the [Software Installation] dialog box appears, see
The default interface language is English.
"Notes on the Installation".
Click [Quick Install for USB].
Make sure that the computer and ma-
chine are properly connected, and then
press the [Power] key.
Installation starts.
If the connection to the computer was not confirmed,
make the port settings again after installation is com-
plete.
If the message "Digital Signature Not Found" or the
[Found New Hardware Wizard] or [Hardware Instal-
lation] dialog box appears, see "Notes on the Installa-
tion".
Select whether or not to open the ma-
chine status monitor automatically, and
then click [Next >].
Check the installation result, and then
click [Next>].
Install User Guide.
Click [Next>].
Confirm the location in which you want
to install Device Setting Utility, and then
click [Next>].
To change the installation location, click [Browse....]
AQR266S
Before Installing the Software
Confirm the program folder in which
you want to install Device Setting Util-
(Network Interface Board)
ity, and then click [Next>].
Connecting the Machine via the Network
Be sure to install all necessary network equipment, such
as hubs, etc. before connecting the Ethernet cable to
the machine.
You can connect a 10BASE-T or 100BASE-TX cable
to the machine.
❒ Ethernet cables are not supplied with this machine.
Select your cable according to the network environ-
Installation starts.
ment.
Lift the connector cover on the rear of
When installation is complete, click [Fin-
the machine, and then plug the Ethernet
ish].
cable into the Ethernet port.
Click [Finish].
Connect the other end of the cable to the
machine's network, such as to a hub.
Check the LEDs on the Ethernet port
The printer driver, TWAIN driver, LAN-Fax driver,
1. The green LED lights if the machine is properly con-
Device Setting Utility, and User Guide are now in-
nected to the network.
stalled.
2. The orange LED lights when the machine is send-
ing or receiving data via the network.
If the message "Digital Signature Not Found" or the
[Found New Hardware Wizard] or [Hardware Instal-
lation] dialog box appears, see "Notes on the Installa-
Specifying Settings on the Control Panel
tion".
Make the following network settings according to the
network interface you are using.
❒ After inserting the CD-ROM, the [Drivers, Manual
If you have connected the machine to a network, make
the required network environment settings.
& Utilities] dialog box appears. If it does not, double-
click the CD-ROM drive icon under [My Computer]
The following table shows the control panel settings
or [Explorer], and then double-click [Setup.exe].
and their default values. These items appear in the [Net-
❒ When installation is complete, the User Guide icon
work Settings] menu.
appears on your desktop.
❒ If a message prompting you to restart the computer
Setting Name
appears, restart the computer.
1. Machn. IP Adress
❒ Confirm the printer driver is correctly installed by
2. Subnet Mask
checking the machine's [Power] key is lit, and then
performing a test print.
3. Gateway Address
4. DNS Settings
5. Ethernet Speed
6. Reset Ethernt Bd
The following example explains making settings for
TCP/IP.
3/4
Quick Installation Guide
Press the [Power] key.
Press the [Menu] key.
The Menu screen appears on the display.
Press the [ ] or [ ] key to display the
[Network Settings] menu, and then press
AQR224S
the [Yes] key.
Press the [ ] or [ ] key to display
[Machn. IP Adress], and then press the
[Yes] key.
AQR229S
Press the [ ] or [ ] key to select
[Specify], and then press [Yes] key.
Use the number keys to enter the IP ad-
dress, and then press [Yes] key.
To get an IP address for the machine, contact your net-
Value
work administrator.
Auto
When using IP address, specify "Subnet
0.0.0.0
Mask" and "Gateway Address" in the
0.0.0.0
same way as when specifying the IP ad-
dress.
Inactive
Auto Select
If necessary, specify "DNS Settings" and
"Ethernet Speed" .
AQR266S
AQR267S
Advertisement
