Residual Heat Indication; Booster Function; Timer - Witt WIP64-5 Instructions Of Use

Residual heat indication

After the switch off of a heating zone or the complete stop of the hob, the heating zones are still
hot and indicates [ H ] on the display.
The symbol [ H ] disappears when the heating zones may be touched without danger.
As far as the residual heat indicators are on light, don't touch the heating zones and don't put any
heat sensitive object on them. There are risks of burn and fire.

Booster function

The Booster function [ P ] and the Double Booster [
selected heating zone.
If this function is activated the heating zones work during 10 minutes with an ultra high Booster.
Booster is foreseen for example to heat up rapidly big quantities of water, like nuddles

Start up / Stop the booster function:
Action
Zone selection
Start up the Booster
Stop the Booster

Start up / Stop the double booster function:
Action
Selection of the zone
Start up Booster
Start up Double Booster
Stop the Double Booster
Stop Booster

Booster management:
The hole cooking hob is equipped with a maximum of Booster. When the Booster function is
activated, and in order to exceed the maximum Booster, the electronic system orders to reduce
automatically the Booster level of an other heating zone. The display is blinking on [ 9 ] during a
few seconds and then shows the maximum of Booster allowed :
Heating zone selected
[ P ] is displayed

Timer

The timer is able to be used simultaneous with all 4 heating zones and this with different time
settings (from 0 to 99 minutes) for each heating zone.

Setting and modification of the cooking time :
Example for 16 minutes at power 7 :
Action
Zone selection
Select the power level
Select « Timer »
Set the units
Valid the units
Set the tens
Valid the tens
The time is confirmed and the cooking starts.
Control panel
Press key [ 0 ] from the zone
Press key [ P ]
Slide on the "SLIDER"
Control panel
Press key [ 0 ]
Press key [ P ]
Re-press key [ P ]
Press key [ P ]
Slide on the "SLIDER"
The other heating zone:
[ 9 ] goes to [ 6 ] or [ 8 ] depending the type of zone
Control panel
press display [ 0 ] selected
slide on the "SLIDER" to [ 7 ]
press display [ CL ]
slide on the "SLIDER" to [ 6 ]
press display [ 06 ]
slide on the "SLIDER" to [ 1 ]
press display [ 16 ]
8
] grants a boost of Booster to the
Display
[ 0 ] and control light on
[ P ]
[ 9 ] to [ 0 ]
Display
[ 0 ]
[ P ]
[
[ P ]
[ 9 ] to [ 0 ]
(example: Booster level 9)
Display
[ 0 ] and control light on
[ 7 ]
[ 00 ]
[ 0 fixed ] [ 6 blinking ]
[ 0 blinking ] [ 6 fixed ]
[ 1 blinking ] [ 6 fixed ]
[ 16 ]
and P ]