Pentax Optio WP Operating Manual page 86

1
Press the four-way controller (4)
in A mode.
The flash mode changes each time the
button is pressed. You can also change the
setting using the four-way controller (23).
2
Press the 4 button.
The camera is ready to take pictures in the
selected flash mode.
[About the red-eye phenomenon]
Taking pictures using the flash may cause the subject's eyes to
appear red in the resulting picture. This phenomenon occurs when
4
the light from the flash is reflected in the subject's eyes. It can be
reduced by illuminating the area around the subject or moving closer
to the subject and zooming out. Setting the flash mode to c (Auto +
Red-eye) or d (Flash On + Red-eye) is also an effective way of
preventing red eyes.
If the subject's eyes appear red despite such precautions, they can
be corrected by the red-eye compensation function (1p.129).
Saving the Flash Mode 1p.97
84
Flash Mode Flash Mode Flash Mode
Auto Auto Auto
OK OK OK
OK