Osaka F 300 User Manual

DIGITAL THERMOSTAT
REFRIGERATION
F 200 / F 300
TSF 200 / TSF 300
F 200 / F 300
TSF 200 / TSF 300
User manual – Version 2
www.osakasolutions.com
INTRODUCTION
In this manual are the information necessary
for proper installation and instruction for use
and maintenance
recommended to read carefully and keep it.
To prevent erratic operation or malfunction of
the THERMOSTAT that can create dangerous
situations, damage to persons, things or
animals, please remember that the facility must meet and be
aware of the safety systems annexes necessary to ensure their
safety.
OSAKA SOLUTIONS or their legal representatives are not
responsible for misuse of THERMOSTAT or not conforming to
the characteristics of the THERMOSTAT.
Index
1 DESCRIPTION THERMOSTAT
1.1 GENERAL DESCRIPTION
1.2 FRONT PANEL DESCRIPTION
2 PROGRAMMING
2.1 QUICK SELECTION SET POINT
2.2 STANDARD PROGRAMMING PARAMETERS
2.3 PROTECTED PARAMETERS BY PASSWORD
2.4 CUSTOM PROGRAMMING PARAMETERS (LEVELS OF
PROGRAMMING PARAMETERS)
2.5 RESTORE FACTORY SETTINGS
2.6 KEYBOARD LOCK FUNCTION
3 WARNING FOR INSTALLATION AND USE
3.1 PROPER USE
3.2 MECHANICAL ASSEMBLY
M3
of the product,
OSAKA - F 200 / F 300 / TSF 200 / TSF 300 / M3 - User Manual - V.2 - PAG. 1
3.3 ELECTRICAL CONNECTIONS
3.4 ELECTRICAL WIRING DIAGRAM
4 OPERATION
4.1 FUNCTION ON / STAND-BY
4.2 SETTINGS OF INPUTS PROBES AND DISPLAY
4.3 DIGITAL INPUT SETUP
4.4 OUTPUTS SETUP FOR RELAYS AND BUZZER
4.5 ACTIVE SET POINT SELECTION
4.6 TEMPERATURE CONTROL
4.7 COMPRESSOR PROTECTION FUNCTION AND DELAY
TO START
4.8 DEFROST CONTROL
4.8.1 AUTOMATIC START DEFROST
4.8.2 MANUAL DEFROST
4.8.3 END OF DEFROST
4.8.4 DISPLAY LOCK ON DEFROST MODE
4.9 EVAPORATOR FAN CONTROL
4.10 ALARM FUNCTIONS
4.10.1 TEMPERATURE ALARM
4.10.2 EXTERNAL ALARM DIGITAL INPUT
4.10.3 OPEN DOOR ALARM
OPERATION OF KEY "F" /
4.11
4.12 ACCESSORIES
CONFIGURATION PARAMETERS WITH "USB KEY"
4.12.1
4.12.2 REMOTE VIEWING "X2"
4.12.3 RS485 SERIAL COMMUNICATION WITH "CONV-TTL
RS"
5 PROGRAMMABLE PARAMETERS LIST
6 TROUBLESHOOTING, MAINTENANCE AND
WARRANTY
6.1 SIGNALS
6.2 CLEANING
M3
6.3 WARRANTY AND REPAIR
7 TECHNICAL DATA
7.1 ELECTRICAL FEATURES
7.2 MECHANICAL FEATURES
7.3 FUNCTIONAL FEATURES
7.4 MECHANICAL DIMENSION AND SUBJECTION
1 – DESCRIPTION
1.1 – GENERAL DESCRIPTION
The F 200 / F 300 / TSF 200 / TSF 300 / M3 are microprocessor
digital thermostats, are suitable for refrigeration temperature with
ON / OFF control and
it is
temperature or continuous operating time compressor, electric
heater or hot gas for investment cycle. The device is equipped with
optimization functions and special defrosting functions used for
energy saving control.
Thermostats, depending on the model, available from 2 to 3 relay
outputs and 2 to 3 inputs for temperature sensors PTC or NTC and
also an internal buzzer for acoustic signalling ALARM and
programming.
Models F 200 / F 300 / TSF 200 / TSF 300 / M3 differ from other
standard models on the design and screen system keyboard.
1.2 – FRONT PANEL DESCRIPTION
Front Panel F 200 / F 300
AND "DOWN / AUX"
intervals time for defrost, to regulate