Pip On/Off Control 0X3C 0~1; Auto Adjustment Control - Samsung PM32F User Manual

Chapter 2. Device setup
Ack
Header Command ID Data
length
0xAA 0xFF 3
"Screen Size": product screen size (range: 0 – 255, unit: inch)
Nak
Header Command ID Data
length
0xAA 0xFF 3
"ERR" : A code showing what error has occurred.
PIP On/Off control
Function
• The PIP mode of a product can be turned on or off using a PC.
• Only available on models that have the PIP function.
• The mode cannot be controlled if Video Wall
• This function is not available in MagicInfo.
Viewing PIP on/off state (Get the PIP ON / OFF Status)
Header Command
0xAA 0x3C
Ack/ r-CMD Val1 Checksum
Nak
'A' 0x19 "Screen
Size"
Ack/ r-CMD Val1 Checksum
Nak
'N' 0x19 "ERR"
is set to On.
ID Data length Checksum
0
Setting PIP on/off (Set the PIP ON / OFF)
Header Command ID
0xAA 0x3C
"PIP": A code used to turn the PIP mode of a product on or off
• 1: PIP ON
• 0: PIP OFF
Ack
Header Command ID Data
length
0xAA 0xFF 3
"PIP": A code used to turn the PIP mode of a product on or off
Nak
Header Command ID Data
length
0xAA 0xFF 3
"ERR" : A code showing what error has occurred.
Auto adjustment control (PC and BNC only)
Function
• Automatically adjust the PC system screen using a PC.
Viewing auto adjustment state (Get Auto Adjustment Status)
• None
Data Data Checksum
length
1 "PIP"
Ack/ r-CMD Val1 Checksum
Nak
'A' 0x3C "PIP"
Ack/ r-CMD Val1 Checksum
Nak
'N' 0x3C "ERR"
25