Setting The Sensitivity - Pentax Optio W10 Operating Manual

R A C Y q < I B Q i C \ E x Q X > P D N J z R

Setting the Sensitivity

You can select the sensitivity to suit the brightness of the surroundings.
Sensitivity
4
Auto Sensitivity is automatically adjusted to between 64 and 400.
64
• The lower the sensitivity, the less noise that affects the image. The
100
• Higher sensitivity settings use faster shutter speeds in low light
200
400
800
1
Press the 3 button in A mode.
The [A Rec.Mode] menu appears.
2
Use the four-way controller (23) to select [Sensitivity].
3
Press the four-way controller (5).
A pull-down menu appears.
4
Use the four-way controller (23)
to change the sensitivity.
5
Press the 4 button.
The Sensitivity setting is saved.
6
Press the 3 button.
The camera returns to capture status with the current setting.
• When set to [Auto] with the shooting mode set to x or R, the
sensitivity is automatically adjusted to between 64 and 800.
• Sensitivity is set at 64 when shooting mode is set to y. Other
values cannot be set.
• If you use the [Sensitivity] function frequently, you can save time
by assigning it to the Green button. (p.58)
Saving the Sensitivity 1p.103
96
shutter speed will be slower in low light conditions.
conditions to reduce camera shake, but the image may be affected by
noise.
MENU
2, 3, 4
5
1, 6
Rec.Mode
1/3
6
Recorded Pixels
M
Quality Level
AWB White Balance
AE Metering
ISO
Sensitivity
AUTO
Exit Exit Exit
MENU
Rec.Mode
1/3
6
Recorded Pixels
M
Quality Level
AWB White Balance
AE Metering
ISO
Sensitivity
AUTO
MENU Cancel Cancel Cancel
Auto
64
100
200
400
800
OK OK OK OK