Displaying Shooting Information In Capture Mode - Pentax Optio S5i Operating Manual

Displaying Shooting Information in Capture Mode

You can display shooting information on the LCD monitor when taking
pictures. The display mode can be changed by pressing the DISPLAY
button.
Display On
Shooting information is displayed when the
power is turned on.
1 Flash mode
3 Focus mode
5 Focus frame
7 Remaining number of recordable images
8 Date and time
10 Aperture
Histogram Display
The brightness distribution of the image is
displayed. The horizontal axis shows the
brightness (darkest at the left end and
brightest at the right end) and the vertical axis
shows the number of pixels.
1 Recorded pixels
3 White balance
5 Sensitivity
Display Off
No shooting information is displayed.
• The focus frame appears in Autofocus
mode.
• If any of the modes are changed, such as
the flash mode, the mode you have
changed appears for a few seconds.
LCD Monitor Off
The LCD monitor turns off.
• The display cannot be turned off in
Q, ,
C G
• The histogram cannot be displayed
in Q mode.
Saving the Display Mode
2 Drive mode
4 Capture mode
6 Card/Built-in memory
9 Battery indicator
11 Shutter speed
2 Quality level
4 AE metering
6 Histogram
, or mode.
F D
p.89
1
1 2 3 4 5
1/160 1/160 1/160
7/18/2004 7/18/2004 7/18/2004
F2.6 F2.6 F2.6
11 10 9
1/160 1/160 1/160
F2.6 F2.6 F2.6
Display On
6 7
2 2
12:00 12:00 12:00
4
8
1 2 3
1 1 1
2560 2560 2560
AWB AWB AWB
AUTO AUTO AUTO
6 5 4
71