On The Lcd Monitor - Pentax Optio S5i Operating Manual

Pentax digital camera operating manual optio s5i
Hide thumbs Also See for Optio S5i:
Table of Contents

Advertisement

Changing the Magnification Using the Remote Control Unit
You cannot only change the zoom magnification with the zoom button,
but also shoot images with the shutter button using the remote control
unit E (optional).
1
Press the four-way controller (2)
in Capture mode to display

on the LCD monitor.

The function is same either in i or
2
Press the zoom button on the
remote control unit.
Each time you press the zoom button, the zoom position will change
4
between tele, middle, and wide.
The zoom position will not change in Super Macro mode, even if you
press the zoom button.
• The buttons on the camera can be used in the normal way.
• Ensure that the remote control unit is no more than four meters
away from the front of the camera.
• You cannot change the digital zoom range with the remote control
unit; you can change only the optical zoom range.
Life of the Battery for the Remote Control Unit
A signal can be sent from the remote control unit to the camera
approximately 30,000 times. Contact your nearest PENTAX customer
service center if the battery needs changing. (A charge is made for
changing the battery.)
64
or h
i
h
.
112
112
112
7/18/2004
7/18/2004
7/18/2004
12:00
12:00
12:00

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Optios5i

Table of Contents