Hide thumbs Also See for DVRN960:

Advertisement

Package Contents
Inspect the packaging carton to make sure the DVRN960 was properly delivered. Make sure the
box contains the following items.
960H H.264 DVR
Power Adaptor
Front Panel
1
Channels
2
Alarm LED
3
Network LED
4
Record LED
5
ENTER
6
ESC
7
Direction Keys
8
MENU
9
SEARCH
10
MODE
11
PLAY
12
FREEZE
3625 Cincinnati Avenue, Rocklin, CA 95765
DVRN960
Setup Guide
IR Remote Control
Power Cord
Rack Mounting Kit
In Live or Playback mode, press any key to view the corresponding video
in full-screen.
Lights up when an alarm is triggered.
Lights up when network is connected. In addition, it also blinks when data
is being transmitted via the network.
Blinks when video is being recorded.
1. In the OSD main menu or selection interface, press this key to make
the selection or save settings.
2. In live and playback full-screen viewing mode, press this key to view a
2x zoom image; press it again to return.
Press this key to cancel or exit from certain control modes.
1. In Zoom mode, these keys function as normal direction keys.
2. In the OSD main menu, the direction keys are used to move the cursor
to previous or next fields. To change the values in the selected field,
press UP / DOWN keys.
Press this key to enter the OSD main menu.
Press this key to search the recorded videos by date / time or event.
Press this key to view in full-screen or multiple-window modes.
Press once to start playing back the recorded video. Press again to exit.
Press this key to freeze the current viewing screen.
D-sub Connector
USB Mouse
855-388-7422
Manuals
Software CD
www.northernvideo.com
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DVRN960 and is the answer not in the manual?

Questions and answers

Summary of Contents for Northern DVRN960

  • Page 1 DVRN960 Setup Guide Package Contents Inspect the packaging carton to make sure the DVRN960 was properly delivered. Make sure the box contains the following items. 960H H.264 DVR IR Remote Control D-sub Connector Manuals Power Adaptor Power Cord Rack Mounting Kit...
  • Page 2: Rear Panel

    Press this key to start an automatic sequence display of cameras. DOME Press this key to enter the Dome Camera Control mode. This key is used for marking time in quick video export function. COPY CALL Press this key to control call monitor. Power Key Press this key to power on the DVR.
  • Page 3 16CH models: VGA output is offered for connecting to VGA monitors.1280x1024, Main Monitor (VGA) 1024x768 resolutions recommended for 4:3 aspect monitors. The USB 2.0 port allows users to connect external USB devices to USB 2.0 Port the unit, such as a USB ThumbDrive or a USB mouse. Connect the power supply cord shipped with the DVR.
  • Page 4 Pin Definition of Alarm I/O & RS-485, and Audio Pin Definition of Alarm I/O & RS-485 and Audio In (4CH / 8CH models) Pin Definition Pin Definition Pin Definition Alarm In 1 Audio In 2 RS485 D+ Alarm In 8 (8CH only) Audio In 7 (8CH only) Alarm Out COM Alarm In 6 (8CH only)
  • Page 5: Power On The Dvr

    Live Panel Buttons The functional buttons are displayed in the Live Panel when the mouse pointer moves to the right of the screen. Refer to the table below for definition of each button. Item Icon Description Item Icon Description Item Icon Description Enter...
  • Page 6: Basic Setup

    Configure the LAN setup for the DVR to properly function with Ethernet connection. The default IP of the DVRN960 must be changed to avoid network conflicts. From the OSD main menu, select <System>  <Network Setup>, set the <LAN Select> item to <LAN>, <PPPoE>, or <None>...
  • Page 7: Dome Camera Control

    Dome Camera Control Dome Camera Connection & Settings: See section Pin Definition of Alarm I/O & RS-485, and Audio for RS-485 port pin definition. Refer to the following figures. Connect the R+, R- terminals on the dome camera to the RS-485 D+, D- terminals on the DVR by RS-485 cable respectively.
  • Page 8 Control Keys in Dome Camera Control Mode: Set / Go Preset Pan / Tilt Iris Close Go Presets 1~6 Zoom In Focus Far (16CH models only) Enter / Auto Zoom Out Focus Near Enter Dome Camera Iris Open Control Mode Control Buttons in Dome Camera Control Panel: Icon Description...
  • Page 9: Basic Playback Operation

    Basic Playback Operation Search By Time: Press SEARCH to enter the Search menu. Move the cursor to “From”, and press ENTER to start playing the recorded video from the beginning of the database. Move the cursor to “End” and press ENTER, and the playback will start from the end of the database.
  • Page 10 NOTE: The event list displays only the first 1024 events; as some events are deleted, others will be displayed. Playback Controls: Button Description The button is to rewind the recorded video while playing back. Press the button LEFT repeatedly to increase the speed of reverse playback by 1x, 2x, 4x, 8x, 16x, or 32x. The button is used to play the recorded video fast forward.
  • Page 11 DVRN960 Status Bar Icons Icons that will be displayed in the status bar are listed in the following table with their descriptions. Item Icon Description Item Icon Description Main Monitor Quick Export Call Monitor Stamp A Monitor Active / Inactive...
  • Page 12 Make sure the PC is connected to the Internet. Obtain the IP address of the DVRN960. To check the IP address of the DVR, press MENU on the front panel and select <System>  <Network Setup>  <LAN Setup>  <IP> to check the IP.
  • Page 13: Item Description

    The following picture shows the display window of the DVRRemote: Refer to the table below for brief description of functional items: Item Description Item Description Audio On/Off 4:3 Viewing Aspect 2-Way Audio Talk Capture Snapshot Instant Recording Search Event List Select Camera Setup Menu Display Mode...
  • Page 14 DVRRemote Playback Playback Remote Video: Click <Play> on the main window toolbar, and then <Remote Playback> tab. <From> and <To> on top of the screen display the date and time from which recorded video is available for playback. Choose <Playback> in <Select> field to playback the recorded video. Select the date and time of the segment to play back from the <Start>...

Table of Contents