Pentax Optio P70 Operating Manual page 95

1
Press the four-way controller (2) in A mode.
2
Use the four-way controller (45)
to select j or K and press the
4 button.
The camera is ready to take a series of
pictures.
3
Press the shutter release button halfway.
The focus frame on the display turns green when the camera focuses
on the subject at the correct distance.
4
Press the shutter release button fully.
Pictures are taken continuously as long as you keep the shutter
release button pressed.
• The flash does not discharge in j and K modes.
• j and K cannot be selected in 9 (Green), b (Auto Picture),
A (Night Scene), C (Movie), S (Fireworks), N (Frame Composite),
X (Digital Wide), F (Digital Panorama) or Vertical Snap mode.
• In j mode, you can continue shooting until the memory capacity of
the SD Memory Card or the built-in memory is full.
• The interval of j (Continuous Shooting) varies according to the
Recorded Pixels and Quality Level settings.
• The focus, exposure and white balance are locked with the first shot.
• When the Face Recognition function is activated (p.70), it works only
when taking the first shot.
• The Blink Detection function works only for the last shot.
Shutter release
button
Four-way controller
4 button
Drive Mode Drive Mode Drive Mode
Continuous Shooting Continuous Shooting Continuous Shooting
Cancel Cancel Cancel Cancel Cancel Cancel Cancel Cancel Cancel Cancel Cancel Cancel Cancel Cancel Cancel
MENU MENU MENU MENU MENU
3
OK OK OK
OK
93