Pentax Optio P70 Operating Manual page 227

Message
Protected
Data being recorded
Data being processed
Built-in memory full
No image to be
processed
This image/sound
cannot be processed
No card in the camera
The built-in memory is
not enough to copy
images/sounds
Cannot process
correctly
Display image/sound
from built-in memory
This image cannot be
registered as a Favorite
No images are available
to register as a Favorite
No image.
Messages such as the following may appear on the display when using
the PictBridge function.
Message
Low paper level
in the printer
No paper in the printer
Paper stuck in the printer
Low ink level
in the printer
No ink in the printer
Printer error
Data error
The image or sound file you are trying to delete is protected.
Displayed when you try to switch to Q mode while an
image is still being recorded, or when the protect setting or
DPOF setting is being changed. It disappears after the
image is recorded or the setting is changed.
Displayed when the camera takes more than five seconds
to display an image due to image processing, or when the
SD Memory Card or the built-in memory is being formatted.
Displayed if the built-in memory is full when saving a file.
Displayed when there are no images or sound files.
Displayed for files that cannot be processed.
Displayed when no SD Memory Card is inserted.
Displayed when there is insufficient built-in memory to
perform copying.
Displayed when Red-eye Compensation processing fails.
Displayed when the camera enters the built-in memory
display.
The selected image is not suitable for registration as a
Favorite.
There are no images suitable for registration as a Favorite.
There are no playable images in the Favorites.
The paper level of the printer is low.
There is no paper in the printer.
The paper is stuck in the printer.
The ink level of the printer is low.
There is no ink in the printer.
An error message has been sent from the printer.
A data error message has been sent from the printer.
Description
Description
9
225