Pentax Optio P70 Operating Manual page 82

• The following settings are fixed in Vertical Snap mode:
- Focus Mode
- Drive Mode
- Recorded Pixels
• You can also use the shutter release button to take pictures in Vertical
Snap mode. When you press the shutter release button halfway to set
the focus, the camera takes the picture at the = (Standard) setting.
If the subject is out of focus, the camera takes the picture at the
3 (Pan Focus) setting.
• The flash mode default setting for Vertical Snap is a (Flash Off). By
pressing the 3 button, you can switch between , (Auto) and
a (Flash Off).
3
• Please take care not to cover the flash with your hand while taking
pictures using the flash in Vertical Snap mode.
• The Green button and zoom lever do not function in Vertical Snap mode.
• The camera automatically turns off if it is not used for 5 minutes in
Vertical Snap mode.
To Select Vertical Snap Setting
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
Use the four-way controller (23) to select [Vertical
Snap].
3
Press the four-way controller (5).
The [Vertical Snap] screen appears.
4
Use the four-way controller (23)
to select [On] or [Cancel].
On
Cancel Disables Vertical Snap
5
Press the 4 button.
The setting is saved.
6
Press the 3 button.
The camera returns to capture status.
80
3 (Pan Focus)
9 (Standard)
f (2592×1944)
Enables Vertical Snap shooting.
shooting.
Vertical Snap
Snaps vertical shots like a
cellphone, using OK button
On
Cancel
OK
OK