Pentax Optio P70 Operating Manual page 110

4
Use the four-way controller (23)
to change the setting.
You can check the results of available white
balance settings on the preview image each
time you press the four-way controller
(23).
5
Press the 4 button.
The setting is saved.
6
3
Press the 3 button.
The camera returns to capture status.
Refer to the following "Manual Setting" for instructions on adjusting the
white balance manually.
If you change the [White Balance] setting frequently, you can save time
by assigning it to the Green button (p.117).
Saving the White Balance setting 1p.123
Manual Setting
Have a blank sheet of white paper or similar material ready.
1
In the [White Balance] screen, use the four-way
controller (23) to select K (Manual).
2
Point the camera at the blank
sheet of paper or other material so
that it fills the frame displayed in
the center of the screen.
3
Press the shutter release button fully.
The white balance is automatically adjusted.
108
White Balance
Auto Auto Auto
MENU Cancel Cancel Cancel
White Balance
Adjust
SHUTTER
Cancel Cancel Cancel
MENU
OK OK OK OK
OK OK OK
OK