Page 1
Original brugsanvisning - Dyksav Originalbruksanvisning - Dykksag Manual de instruções original - Serra de incisão Оригинальное руководство по эксплуатации - Погружная пила Originál návodu k obsluze - Ponorná pila Oryginalna instrukcja eksploatacji - Zagłębiarka TS 55 REBQ TS 55 REQ TS 55 RQ...
Page 2
TS 55 Original operating manual Symbol Significance Symbols..........Safety class II Safety instructions ....... Safety instructions Intended use......... General safety instructions Technical data ........WARNING! Read all safety warnings, in- Machine features........structions, illustrations and specifications provided with this power tool. Failure to follow all Operation..........
Page 3
TS 55 cially designed for your saw, for optimum perfor- placed under the panel on both sides, near the mance and safety of operation. line of cut and near the edge of the panel. i.Wear suitable protective equip- e. Do not use dull or damaged blades. Unsharp- ment such as ear protection, ened or improperly set blades produce narrow safety goggles, a dust mask for...
Cutting wood < 2,5 m/s fitted with special saw blades for aluminium of- Cutting metal = 2,8 m/s fered by Festool, these machines can also be used Uncertainty K = 1,5 m/s for sawing aluminium. The specified emission values (vibration, noise)
Lever for changing blades chine! [1-6] Switch-on lock [1-7] On/Off switch Electronics The machine (TS 55 REBQ/ TS 55 REQ) features [1-8] Extractor connector full-wave electronics with the following properties: [1-9] Release buttons for undercuts -1° to 47° Smooth start-up...
Page 6
Do not use insert tools that are blunt or defec- tive. A Festool mobile dust extractor with an extractor hose diameter of 27 mm or 36 mm (36 mm recom- Wear protective gloves. mended due to the reduced risk of clogging) can be connected to the extractor connector [1-8].
For work that generates dust, wear a dust address at: www.festool.com/service mask. Sawing along the scribe mark EKAT Only use original Festool spare parts! The cutting indicator [7-2] displays the cutting line Order No. at: www.festool.com/service for 0° and 45° cuts (without guide rail). Cutting sections...
The edge of the splinterguard now corresponds ex- Accessories actly to the cutting edge. The order numbers of the accessories and tools can be found in the Festool catalogue or on the Internet Environment under "www.festool.com". Do not dispose of the device in house-...