Signal Input Level Setting Area; Time Delay And Distance Setting Area - Academy Dragster ADSP 8 Instruction Manual

10.7.2. Signal Input Level Setting Area

(1) Signal input level setting: you can set an independent volume level
for each signal source. Adjusting range: -59.9dB ~ 0.0dB or shut down.
(2) Single input Choice Buttons: when the the signal button is displayed
in green, it corresponds to the current source.

10.7.3. Time Delay and Distance Setting Area

In this setting area, left click milliseconds, cm and inch buttons to set the
unit of time delay and distance. Click the corresponding output channel time delay
on the white letters in the setting area: when change to cursor, input values to
adjust the time delay and distance parameters. The parameters range as below:
A. Millisecond: 0.000MS – 20.000MS
B. CM: 0.00CM – 692.00CM
C. Inch: 0.00 – 272.37 inches
32
32
ADSP 8