Software Input Signal Interface - Academy Dragster ADSP 8 Instruction Manual

10.5. Software Input Signal Interface

10.5.1. Signal Input Setting Area
(1) Signal input selection and edit
Select the input signal among "High-level", "Bluetooth", "AUX1", AUX2", "AUX3",
"Digital", "Coaxial". Switching the signal input channel accordingly, the
parameters of the corresponding channel equalizer will be displayed. Select the
"automatic input selection" button, the DSP processor will detect and lock the
signal input channel automatically.
Note:
selecting the "automatic input selection" the processor automatically
identifies the kind of signal input recalling the selected signal setting
previously used.
(2) AUX mode setting (Low-level mode setting)
Left.click the "2 channels", "2 channels/4 channels", "6 channels" buttons,
that can configurate the Low-level mode.
A. 2 channels: 3 groups stereo input mode
B. 2 channel/4 channels: 1 group stereo input mode and 4 channels input
mode 1.
C. 6 channels: 5.1 channels input mode.
Refer the 4.2, AUX level-input pin for connection method.
23
ADSP 8