Philips HD3198 User Manual page 6

Only connect the multicooker
•
to a grounded power outlet.
Always make sure that the
plug is inserted firmly into the
power outlet.
Do not use the appliance if the
•
plug, the power cord, the inner
pot, the sealing ring, or the
main body is damaged.
Do not let the power cord
•
hang over the edge of the
table or worktop on which the
multicooker stands.
Make sure the heating element,
•
the temperature sensor, and
the outside of the inner pot are
clean and dry before you put
the plug in the power outlet.
Do not plug in the multicooker
•
or press any of the buttons
on the control panel with wet
hands.
Make sure to avoid spillage on
•
the power connector to avoid
a potential hazard.
Always follow the instructions
•
and use the appliance properly
to avoid potential injury.
Do not put too much cooking
•
oil in the inner pot to deep fry
ingredients.
EN
4
Caution
Never use any accessories or
•
parts from other manufacturers
or that Philips does not
specifically recommend. If you
use such accessories or parts,
your guarantee becomes
invalid.
Do not expose the multicooker
•
to high temperatures, nor place
it on a working or still hot
stove or cooker.
Do not expose the multicooker
•
to direct sunlight.
Place the multicooker on a
•
stable, horizontal, and level
surface.
Always put the inner pot in the
•
multicooker before you put the
plug in the power outlet and
switch it on.
Do not place the inner pot
•
directly over an open fire to
cook dishes.
Do not use the inner pot if it is
•
deformed.
The accessible surfaces
•
may become hot when the
multicooker is operating. Take
extra caution when touching
the multicooker.