Powering The Camera; Installing The Batteries - Pentax Optio M20 Operating Manual

Powering the Camera

1

Installing the Batteries

Install the batteries into the camera. Use two AA alkaline, AA lithium, AA
Ni-MH, or AA nickel manganese batteries.
1
Open the battery/card cover.
Pull the battery/card cover in the direction of 1 and flip the cover open
in the direction of 2.
2
Insert the batteries, making sure the (+) and (–) on the
batteries match the (+) and (–) inside the battery
compartment.
3
Close the battery/card cover and slide it back into
place.
20
1
2