Control Change - Roland MT-32 Owner's Manual

3.
FUNCTIONS ACCESSIBLE WITH
AN
EXTERNAL
MIDI
MESSAGE
a.
Program Change and Control Change
The
MT-32
accepts external
MIDI
messages {Program
Change
and
Control Change) which
redefine the
MT-32
settings.
These messages
provide
independent
control over any of the
non-rhythm
parts.
•
TIMBRE SETUP {PROGRAM CHANGE)
This function allows the
MT-32
to
select
the
timbre
as
specified by
an external
Program Change number
(a
superscript
appearing to the
left
of the timbres
in
the
"Sound
List").
*The
timbre setup procedure
using
a
Program Change number
differs
from the one using the
MT-32
control panel.
See page
23
for details.
• MODULATION DEPTH (CONTROL
CHANGE
[1])
This function changes the vibrato effect
•
VOLUME LEVEL FOR EACH PART
(CONTROL
CHANGE
[7])
This function
sets
the
volume
level
for
each
part.
• PAN-POT
(CONTROL CHANGE
[10])
This function
changes the stereo balance of the
MT-32
output.
• EXPRESSION
{CONTROL CHANGE
[11])
This function controls
sound
dynamics.
*The sound dynamics can
be controlled
by the Expression and the
volume
level
settings
(as
determined by the
MT-32
control panel
setting
or Control
Changes
[7]
and
[11]
).
•
HOLD {CONTROL CHANGE
[64])
This function causes the
MT-32
to
suspend
control so that con-
tinuous notes maintain the
sustain
level
and
attenuating notes
simulate the effect of a piano
damper
pedal.
20