Table of Contents
Advertisement
STEP 3 - Press the LOCK button on the 1st transmitter to be programmed.
The horn will honk once and the status light will flash 2 times (once to
indicate transmitter learn mode & once to indicate the 1st transmtter)
STEP 4 - Repeat STEP 3 for each additional transmitter. The horn will honk 2
times for the 2nd transmitter, 3 times for the 3rd, etc. & the status light
will flash once to indicate learn and twice for the 2nd remote, etc.
The system will exit transmitter programming if 10 seconds passes with
no activity OR if the vehicle's ignition is turned off. This is indicated by two horn
honks and the status light will stop flashing. A maximum of 4 transmitters can
be learned into this system.
ORDERING REPLACEMENT TRANSMITTERS
Replacement transmitters are available for this system and can be
purchased from your installing dealer or directly from Omega R&D, Inc. To
purchase directly from Omega R&D, Inc. visit us at www.caralarm.com or call
us at 800-554-4053. This system uses transmitter model #4410-07 which is
powered by a CR2032 battery.
Purchasing direct from Omega offers a number of benefits:
- Get the latest factory authorized versions of our products.
- All products carry a limited lifetime warranty.
- Receive full customer support services when you have questions or issues.
Advertisement
Table of Contents
