Sharp PC-1500A Instruction Manual page 116

All and more about Sharp PC-1500 at http://www.PC-1500.info
7. Using Two Tape Recorders
Tape Aecofder 0
@®®®~
"°"""
•A"
w t " ' " " •• ., , • • ,.
@
®@ ® Ill::
• •• -e: •• .,.
t I I
B lack plug
I
remote control)
Blac;k plug
(remote control I
Red plug
(recording)
Bl<Jek p lug
(remotP. cont rol )
Grev plug
(transfer <:ind
collation}
Red plog
(recording) A uxiliar y cable
(remote control)
CMsc"e connection <:able
@ ®® ® !rm
V >' .. .;_ . ,.,
Gre-v
plug
(transfe r and
\ collation!
\
\\
Black plug
Cremote control)
When using two tape recorders, one of them is vsed tor recording and the o ther fo r playback.
As illustrated, the Printer/Cassette Interface and the two tape recorders are connected by using
the connection cords and the auxiliary cord for remote control.
• The CE· 150 is equipped with two remo te control terminals REM 0 and REM 1, either of
v1hich can be used. In program operation {no t manually}. however. the program designates
the tape recorder connected to the REM 0 term inal or the REM 1 terminal. The·reforc. these
remote control terminals should be connected a<:cord ing to the program.
In this section. how to operate the second tape recorder connected to the REM 1 term inal of the
interface is ex plained
1. Saving
Procedures:
( 1) Type RMT OFF and press l•HT•• I to reset the second remote control function . (Control
of Tape recorder
1 in
the
illustration above}
(2) Put a tape into the tape recorder.
(3) Type RMT ON and press
IENTE•)
to set the second remote control function.
(4) Set the vo lume and tone controls in the same manner as that explained previously in the
single
tape
recorder.
(5) Depress both the RECORD and the PLAY buttons simultaneously.
1 14
Do not sale this PDF !!!