Probe Wrap Use; Using The Igrill Mini; Smart Led - Weber iGrill Mini User Manual

Grill thermometer

Hide thumbs Also See for iGrill Mini:

Table of Contents

The probe should be cleaned by hand with a damp towel

or sanitary wipe. The probe is not dishwasher safe. Take

precaution not to get the wiring of the probe wet.

Be sure to avoid water exposure to the wiring of the probes

as well as the area where the wiring and crimp meet the

probe. The probe is not waterproof and damage may result

from water exposure. The probe should never be submersed

in water.

Temperatures below -22°F or above 572°F (-30ºC or above

300ºC) will not display in the Weber iGrill App and will cause

the probe to disappear from connection.

Probe Wrap Use

To wrap your probe:

• Hold the probe wrap so that the clip segment is on the bottom left

and the logo is legible in the center of the probe wrap.

• Snap the probe into the clip of the probe wrap, ensuring that the

probe's body follows the contour of the probe wrap and leaves a

½ inch gap between the probe and the wire channel of the probe

wrap. The tip of the probe should be pointed downward.

• Wrap the wire of your probe clockwise around the probe wrap.

• When you reach the adapter end of the probe wire, it can be

inserted into the probe wrap's wire channel to secure the wrapping.

The Smart LED allows the iGrill Mini to display the connected probe

temperature reading through the use of color. Below is a list of all of the

light combinations you will see on the Smart LED and their associated

meanings:

Table of Contents

Show Quick Links

Table of Contents