Pentax K100 D Operating Manual page 38

36
7
Press the four-way controller
(p).
The frame moves to the month.
2
8
Use the four-way controller (mn) to set the month.
Set the day and year in the same manner.
Next, set the time.
If you select [12h] in Step 4, the setting switches between am and pm
depending on the time.
9
Press the 4 button.
The camera is ready to take pictures. If you set the date and time with
the menu operations, the screen will return to the [H Set-up] menu.
Press the 4 button again.
You can cancel the setting operation and switch to Capture mode during initial
settings by pressing the 3 button. In this case, the Initial Settings screen
will appear again the next time you turn the camera on.
• When you finish the settings and press the 4 button, the camera clock is
reset to 00 seconds. To set the exact time, press the 4 button when the
time signal (on the TV, radio, etc.) reaches 00 seconds.
• You can change the language and date and time settings with the menu
operations. (p.170, p.174)
Date Adjust
Date Style
mm/dd/yy24h
Date 01 / 01 /
Time 00 : 00
Cancel
2006
OK
OK