Siemens SIMATIC NET S7-1200 Operating Instructions Manual page 61

5. Download the certificate to your PC by clicking the "Install certificate ..." button.
6. When the connection has changed to the secure mode HTTPS ("https://<IP address>/..."
Connection establishment with HTTPS
1. Connect the PC on which the new firmware file is located to the CPU via the Ethernet
2. Enter the address of the CPU in the address box of your Web browser: https://<IP
3. Press the Enter key.
4. Continue as described in the following section "Downloading firmware".
Loading firmware
1. Log in on the start page of the Web server as an administrator.
2. After logging in, select the entry "Module status" in the navigation panel of the Web
3. Select the CP in the module list.
4. Select the "Firmware" tab lower down in the window.
5. Browse for the firmware file on your PC using the "Browse..." button and download the file
CP 1243-1 DNP3, CP 1243-1 IEC
Operating Instructions, 02/2014, C79000-G8976-C312-02
The certificate is loaded on your PC.
You will find information on downloading a certificate in the help of your Web browser and
in the STEP 7 information system under the key words "HTTPS" or "Access for HTTPS
(S7-1200)".
in the address box of the Web server), you can continue as described in the next section
"Downloading firmware".
If you terminate the connection to the Web server, the next time you can log in with the
Web server without downloading the certificate using HTTP.
interface.
address>
The start page of the Web server opens.
– User name: admin
– Password: No password necessary
server.
to the station using the "Run update" button.
Diagnostics and upkeep
6.2 Downloading firmware
61