Summary of Contents for VStarcam Pangolin T series
Page 1
PnP IP/Network Camera Quick Installation Guide Pangolin T series VStarcam, IP Camera Expert...
Page 2
一. Hardware installation Please connect the IP camera and router via network cable. And make sure that the Power indicator light of the router is on (yellow) and the Network Indicator light is flashing (green). Please use the provided power adapter. Unauthorized power adapter may damage the IP camera.
Page 3
二.View via Android mobile phone Install the P2PCam264 software:Visit the URL: http://cd.gocam.so via the phone web browser, and follow the instruction to download or scan the QR code to download the PnP version software. 2. " VsCam" will be shown on the phone 3.
WIFI Setup Click the icon on the right of the camera to set the camera. click “Setting” and “Wifi Setting”, then the Router SSID list will pop up. Click the right SSID, and input WIFI password, click "OK". Then unplug the camera's network cable, the camera will restart, and auto connect to the WiFi.
Page 5
三.View via iPhone Install the VsCam software: Visit the URL: http://cd.gocam.so via the phone web browser, and follow the instruction to download or scan the QR code to download the PnP version software. "VsCam" will be shown on the phone Run the software and click “Add”...
Page 6
WIFI Setup Click the arrow icon of the online camera, press “WIFI Setting” label, then the Router SSID list will pop up. Click the right router's SSID, and input WIFI password, click "Add". Then unplug the camera's network cable, the camera will restart, and connect the WIFI automatically. Notes: If the device has Pan/Tilt function, users can slide up and down on the video screen to control the camera P/T.
Page 7
四.View via PC 1. Visit http://cd.gocam.so to get a download link for PC client. After installation this icon will be shown on the desktop,double click it. 2. Click "Add Camera", to connect camera in LAN or in WAN. Add cameras in LAN: click “Find” button and select the cameras. Add cameras in WAN: Input UID (UID can be found on the bottom of the camera or warranty card) Default password: 888888.
Page 8
4. Double click "IP Camera" icon to view the camera. Note:For more information, please refer to online CD: http://cd.gocam.so...
Page 9
FCC Warning Statement Changes or modifications not expressly approved by the party responsible for compliance could void the use r’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Need help?
Do you have a question about the Pangolin T series and is the answer not in the manual?
Questions and answers