Automatically Change Capture Conditions (Auto Bracket Mode) - Pentax Optio 33L Operating Manual

Automatically Change Capture Conditions (Auto
Bracket Mode)
You can automatically take three pictures in a row with different settings
4
for exposure, saturation, sharpness, and contrast. For exposure and
white balance, the bracket step must be set in advance.
1
Press the four-way controller (
The virtual mode dial is displayed.
2
Press the four-way controller (
Bracket (
3
Press the four-way controller (
The bracket type selection screen is displayed.
4
Press the four-way controller (
select the bracket type.
5
Press the OK button.
The camera is in Bracket Capture Mode.
6
Press the shutter release button.
The pictures are taken in Auto Bracket mode.
• Check the images in Playback mode.
• Setting the Auto Bracket Mode will cancel the Continuous Shooting mode.
• To exit auto bracket capture mode, switch to another mode.
64
)].
l
Playing Back Still Pictures
Shutter release button
Four-way controller
OK button
) in Capture Mode.
3
) to select [Auto
23
).
5
) to
23
Auto Bracket
Saturation
OK Ok
p.24
1