Operation; Blue Power Led; Adjusting Monitor Settings; Care And Maintenance - Polaroid PBC-A56J User Manual

OPERATION

Testing the System
1.The blue LED will light when power is on.
2.With the park brake applied,turn the vehicle ignition switch to the ON position. Do not start
the vehicle.
3.Shift the vehicle to reverse to power the transmitter.The blue power LED will light
continuously and the monitor will display the image from the camera.
4.If the image does not display, check your connections and make sure the camera view is not
obstructed.
7.Monitor Controls
1 2
Legend 1.Power LED 2.Up Button

Blue Power LED

The LED will blink when the monitor has power and is turned on, but the vehicle is not in reverse
(standby mode). When the vehicle is in reverse, and the monitor has power and is turned on, the
LED will light continuously.

Adjusting Monitor Settings

To adjust the following monitor settings, make sure the park brake is applied, turn the ignition
switch to the ON position and shift the vehicle to reverse.
-5-
3 4
3.Menu Button 4.Down Button
NOTICE
In extremely bright conditions, the screen image may take a few seconds to stabilize. Wait until
the image has stabilized before backing up.
1.Press the menu button to bring up the settings screen.
2.Press the menu button to scroll through the different adjustments. Press the up button to
increase or the down button to decrease settings.
3.The monitor can be mounted in any position. To change the view on the screen, scroll to
direction. Press the up or down button to change the view and display the image correctly.
4.To exit, scroll to exit and press the down or up button.
5.To turn the guidelines on or off, press the guidelines button.

CARE AND MAINTENANCE

CLEANING

Do not clean or wipe the Back-Up Camera with solvents or chemical materials. If necessary,
remove dirt or stains using a soft cloth dampened with a mild detergent solution.
DISPOSAL
The Back-U Camera is designed to provide years of service. The Back-Up Camera should be
recycled or safely disposed of at a local recycling center. Examples of places that will accept
items like this are: county or municipal recycling drop-off centers or scrap metal dealers.

SPECIFICATIONS

Camera
Current consumption (with transmitter)
Pixels
View angle (measured 9.8 ft [3 m]from camera)
Power cord fuse
Transmitter
Frequency
RF transmission distance
Operation/storage temperature
Monitor
Display screen size
Power cord fuse
<250 mA
640 x 480
120士15
DC12-24V 1A
2414土0.3 MHz
495 ft (150 m)
14-140F(-10-60C)
4.3 in. (109 mm)
DC 5V 1A
-6-