Quick Guide - boso medicus exclusive User Instructions

Quick guide

➡ Insert batteries, ensure correct position-
ing (P. 47)
➡ Connect cuff to monitor (P. 53)
➡ Attach cuff (P. 54)
➡ Start (and stop) a measurement by
pressing the START button (P. 57+58)
Measured systolic, diastolic and pulse
values are displayed after the measure-
ment is completed (P. 59)
➡ Retrieving values from memory (p. 61):
press the M button while the device is
switched off. The first figure displayed
is the average of all measurements
42
stored (ALL), with WHO classification.
The number of measurements stored is
shown under 'ALL'. This is followed by
displays of the morning averages
(AM), the afternoon averages (PM)
and then each individual reading.
This quick guide does not replace the
detailed information on the use and
safety of the blood pressure monitor fea-
tured in the user instructions.
Please be sure therefore to read
the user instructions!