Assembly - BD -125WP Owner's Manual And Operating Instructions

BD-125WP
Handle
You have a choice of using a straight Handle or D-Handle.
(A)
Place D-Handle on polisher
and insert bolt.
NOTE: The D-Handle and the motor cover cannot be used at the same time.
Shroud
(A)
Place Shroud on polisher
with the lever clamp open.
Motor Cover
(A)
Slide on Motor Cover and
secure with bolts.
(B)
Tighten bolts on both sides.
(B)
Use the adjusting screw
to open the collar to the
correct size.
NOTE:
The Motor Cover is designed to allow the user to
apply pressure directly to the polisher's gear box
without feeling the heat created by the tool.
14

ASSEMBLY

(C)
Or install the straight handle by
rotating clockwise to tighten.
It may be installed on left or
right side.
(C)
Secure Shroud by closing
lever clamp.