7/4/03 Evacuation (Plastic Cover) - Lippe Lift Konstanz Operating Instructions Manual

4.7.3 Evacuation / only by technical personnel (Version with plastic cover)
In order to help the operator from the lift, one should proceed as follows:
 Press the EMERGENCY-OFF button on the platform. (S.7.8/Item3.)
 Remove the cover cap on the top side on the front paneling by means of a
screw driver or similar.
 Press the visible bolts forwards. In the process, the upper safety gates can be
folded up at the same time manually.
 Now the operator can be helped out of the lift on the upper side.
The platform should be folded up manually so that the lift does not block the stair
access(See 4.5.2).
In order to reach the main switch with the plastic version, the cover screws must be
removed, then the cover can be pulled up.
Operator manual Konstanz STG/ASA 17/20
Cap
Version 8.0 (01/2010)