7/4/01 Hand Wheel Operation - Lippe Lift Konstanz Operating Instructions Manual

4.7.1 Manual operation / operating with hand wheel
The stair lift Konstanz can also be operated manually. Manual operation should be
carried out by technical specialists! Here, one should proceed as follows:
a) Press the EMERGENCY-OFF button on the platform. (S.7.8/Item3.)
b) The screwed connections on the motor cover should be loosened with an Allen
wrench (delivered in an envelope).
c) The motor cover should be folded up(see image below).
d) The brake ventilation lever should be pressed forward or backwards and
simultaneously
motor (image below).
In the process, the lower stopping point should always be driven up to (less force
expenditure when turning the hand wheel). The respective rotational direction
should be directly specified on the hand wheel.
Note: In case the cause of the downtime is not clear, one should assume, that the
safety catch was triggered and its safety switch has led to the deactivation of the lift.
The safety catch may only be reset by technical personnel. In this case, one
should proceed as described above in a) to d), however the hand wheel must first be
turned to UP (until the lift has moved approx. 5 cm. on the track), then the hand
wheel can be turned in the direction DOWN.
Operator manual Konstanz STG/ASA
the hand wheel must be rotated on the shaft end of the
15/20 Version 8.0 (01/2010)