Overview
The Redundant Monitor software is a Microsoft Windows application and has following functions.
1. Monitor the status of redundant WV-ASC970 MPUs/Servers in several domains at once.
2. Manually switch the Active and Standby states of a pair of redundant MPUs/Servers.
3. Set the redundant mode to Automatic or Manual.
PC Hardware and Operating System Requirements
Minimum Hardware Requirements
•
®
PC with an Intel
Pentium
•
512 MB memory
•
200 MB free hard drive space
•
10/100 Mbps Ethernet network interface card
Minimum Video Display Setting Requirements
•
32 bit colors or higher
•
1024 x 768 resolution
Operating System Requirements
•
®
®
Microsoft
Windows
•
®
Microsoft
Windows Vista
•
Microsoft
®
Windows
®
Installation
1. Connect the Windows PC to the MPU/Server network. This can be the same PC that is used for the WV-ASC970 Admin
Console.
2. Place the WV-ASC970 CD in the CD-ROM drive. If the CD does not automatically start, run SystemMenu.exe in the root of
the CD.
3. Select "WV-ASC970 Redundant Monitor" from the installation menu that appears.
4. Follow the instructions to complete the install.
Note:
The installation requires the Administrator privilege.
If the Microsoft .NET Framework 3.5 and Windows Installer 3.1 have not been installed, they are installed from the CD
automatically.
6
Redundant Monitor Operation Guide
®
4 processor 3.0 GHz
7 Professional 32 bit (English/Chinese)
®
Business Service Pack 2 32 bit (English/Chinese)
XP Professional Service Pack 3 (English/Chinese)
V1.0.0