Browser Unit Type B - Ricoh B230 Service Manual

1.20.13 BROWSER UNIT TYPE B

Unplug the main machine power cord before you do the following
procedure.
SD card slot 3 is basically used only for service maintenance. Do not leave an SD card in
slot 3 after installing an application.
1. Remove the slot cover [A] from SD card slot 3 (
2. Turn the SD-card [B] label face to the rear of the machine. Then push it slowly
into slot 3 until you hear a click.
3. Plug in and turn on the main power switch.
4. Push the "User Tools" key.
5. Push the "Login/ Logout" key.
6. Login with the administrator user name and password.
7. Touch "Extended Feature Settings" on the LCD.
8. Touch "Install" on the LCD.
9. Touch "SD Card".
10. Touch the "Browser" line.
11. Under "Install to:" touch "Machine HDD" and touch "Next".
12. When you see "Ready to Install", check the information on the screen to confirm
your previous selection.
13. Touch "OK". You will see "Installing...", and then "Completed".
14. Touch "Exit" to go back to the setting screen.
15. Touch "Change Allocation".
16. Touch the "Browser" line.
17. Press one of the hard keys, which you want to use for the Browser Unit.
B230/B237/D042
x 1).
1-82 SM