prietest TOUCH
2.2. Use of the instrument:
Ø The instrument has to be used for the designed purposes under specified
conditions, following proper procedures and safety rules, by qualified personnel.
Ø
THIS MANUAL CONTAINS INSTRUCTIONS FOR OPERATION BY QUALIFIED PERSONNEL
Ø A qualified user has to make sure that environmental condition is suitable, the
installation is correct, the use and maintenance are proper, according to the general
safety rules as well as to the particular precautions described in the manual.
(However, he is not entitled to repair the instrument).
Ø A qualified technician is entitled to maintain and fix the instrument, according to the
instructions given, using the original spare parts. Maintain room temperature and
Humidity as specified in the manual.
Ø The instrument has to be used as described in this manual. If it is not use the
protection provided by the instrument may be impaired.
Ø Alterations to the instrument are prohibited. The user is liable for any improper
modification to the instrument, and for the deriving consequences.
Ø Should the instrument need extraordinary maintenance, contact MANUFACTURER
service or authorized service center. Specialized technicians who will be able to
repair the instrument using original spare parts will carry out the maintenance.
Ø This IVD equipment complies with the emission and immunity requirements as per
IEC61326 series.
Ø Warning : This equipment has been designed and tested to CISPER11 Class A. In
a domestic environment it may cause radio interference, in which case, you may
need to take measures to mitigate the interference."
Ø An advisory that the electromagnetic environment should be evaluated prior to
operation of the device.
Ø Warning : Do not use this device in close proximity to sources of strong
electromagnetic radiation (e.g. unshielded international RF sources), as these may
interfere with the proper operation.
Version No.: 2.622A
Effective Date: July, 2010
Page 6 of 52
USER MANUAL
.
Need help?
Do you have a question about the prietest TOUCH and is the answer not in the manual?