■
Installing the clips
Engine oil
With the engine at operating temperature and turned off, check the oil
level on the dipstick.
■
Checking the engine oil
Park the vehicle on level ground. After turning off the engine, wait
STEP
1
more than five minutes for the oil to drain back into the bottom of
the engine.
STEP
2
Wipe the dipstick clean.
STEP
3
Reinsert the dipstick fully.
STEP
4
Holding a rag under the end, pull the dipstick out and check the
STEP
5
oil level.
4-3. Do-it-yourself maintenance
Press the tip of the clip against a
hard surface, such as a desk, to
allow the center part of the clip
to be pushed up.
Insert
Press
Hold a rag under the end and pull
the dipstick out.
4
377