Lexus ES 350 Owner's Manual page 341

Hide thumbs Also See for ES 350:

Table of Contents

3-7. Other interior features

Repeat the steps above to program another device for each of

the remaining HomeLink

Press and hold one of the

changes from a slow to a rapid

flash, you can release both buttons.

If the HomeLink

comes on but does not flash,

flashes rapidly for 2 seconds

and remains lit, the HomeLink

button is already programmed.

Use the other buttons or follow

tions. (P. 340)

Test the HomeLink

pressing the newly programmed

If a HomeLink

programmed for a garage door,

check to see if the garage door

opens and closes. If the garage

door does not operate, see if your

remote control transmitter is of the

rolling code type. Press and hold

the programmed HomeLink

ton. The remote control transmitter

is of the rolling code type if the

rapidly for 2 seconds and then

remains lit. If your transmitter is of

the rolling code type, proceed to

the heading "Programming a roll-

ing code system".

buttons and the trans-

indicator light

"Reprogramming

button" instruc-

operation by

button has been

indicator light flashes