Using The Grater - REBER 9224 N Use And Maintenance

contact with the food, screw the ring nut and never remove during the functioning of the
meat mincer When the work is finished, to dismantle the meat chopper, turn the ring nut
(11) anticlockwise, remove the knife (10), the plate (9) and the propeller (8). Remove the
cast iron body (7) from the reduction gear cover (6), then wash, carefully dry and evenctually
grease all the parts that have come into contact with the meat. Before replacing the
appliance it is advisable to put the red cap back on in the place of the cap with bleed.
"Reber" electric meat choppers are fitted for operation with plates having holes of diameter
from 3 mm to 12 mm. Reber snc decline all liability concerning damage or accidents
deriving from using plates having holes of diameter greater than 12 mm.
GRATER UNIT
Body and handle in aluminium, roller in tin-plated steel and collection drawer in a plastic
material for foodstuffs. The grater is inserted onto the geared motor by means of an axial
revolution multiplier with nylon gears supplied in the package.

USING THE GRATER

Before operate, wash with boiling water and carefully dry all the parts that have come into
contact with the food.When the work is finished, undo the screws (11) and remove the
nylon cover (10) to take out the toothed roller (9) to which are fixed the pin (4) and the
small gear (3). Wash, carefully dry and evenctually grease all the parts that have come
into contact with the food. Before replacing the appliance it is advisable to put the red cap
back on in the place of the cap with bleed.
DOUGH MIXER UNIT
Dough mixer base in die-cast aluminium alloy; steel bevel reduction gear; mixing shaft
in precision-cast stainless steel AISI 316; mixer container and cover in highly resistant
semitransparent polycarbonate, detachable for easy cleaning (even in dishwasher). Safety
switch preventing the mixer shaft from operating when the cover is open. Suitable for any
kind of dough: pasta, bread, pizza, cakes.
USING THE DOUGH MIXER
The unit is deliverd ready for use, efore operate, wash and carefully dry all the parts that
have come into contact with the food
The conical transmission of the dough mixer is lubricated with specific grease of Long
Life type which doesn't have to be changed or added.
The Accessories start key (13) must be used to let the motor start using the accessories
of the motor other than the dough mixer..
Make sure that the switch is in the position OFF before changing the accessories and
before introducing the blocking of the safety switch.
When changing the accessories, please follow carefully the installation instructions supplied
with the machine.
The machine is prepared for putting into practice:
-Remove the cap (7) rotating it counterclockwise.
-Fill in the tank (8) according to the quantities and ingredients mentioned in the paragraph
called Recipes and Advice for Usage.
-Place the cap (7) on the tank (8) (rotate the cap in such a way in order to fasten it, and
rotate clockwise and block it at the end in order to allow the putting into practice of the
machine.
-During the functioning, if necessary, liquid or flour may be added through the slots of the
cap (7) without turning off the machine.
23