ZyXEL Communications AMG1202-T10B Support Notes page 75

AMG1202-T10B/AMG1302-T10B
Support Notes
Protocol uses 128-bits keys that are dynamically generated and distributed by
the authentication server. It includes a per-packet key mixing function, a
Message Integrity Check (MIC) named Michael, an extend initialization vector
(IV) with sequencing rules and a re-keying mechanism.
If you do not have an external RADIUS, server, you should use WPA-PSK
(WPA Pre-Share Key) that only requires a single (identical) password entered
into each access point, wireless gateway and wireless client. As long as the
passwords match, a client will be granted access to a WLAN.
Here comes WPA-PSK Application example for your reference.
 Configuration for Access point
The IEEE 802.1x standard outlines enhanced security methods for both the
authentication of wireless stations and encryption key management.
Authentication can be done using local user database internal to the
AMG1302-T10B/AMG1202-T10B (authenticate up to 32 users) or an external
RADIUS server for an unlimited number of users.
Step 1: To change your AMG1302-T10B/AMG1202-T10B's authentication
settings, login Web Configurator, Advanced Setup, Network Setting->
Wireless -> General
Step 2: Select 'Security Mode' as WPA-PSK.
Step 3: Type the Pre Shared Key in the Pre-Shared Key field.
75
All contents copyright © 2013 ZyXEL Communications Corporation.