ZyXEL Communications AMG1202-T10B Support Notes page 72

AMG1202-T10B/AMG1302-T10B
Support Notes
Step 2: Install an access point at the preliminary location.
Step 3: Use a notebook with wireless client installed and run its utility. A utility
will provide information such as connection speed, current used channel,
associated rate, link quality, signal strength and etc information as shown in
utility below.
Step 4: It's always a good idea to start with putting the access point at the
corner of the room and walk away from the access point in a systematic
manner. Record down the changes at point where transfer rate drop and the
link quality and signal strength information on the diagram as you go alone.
72
All contents copyright © 2013 ZyXEL Communications Corporation.