ZyXEL Communications AMG1202-T10B Support Notes page 51

Example
The following example shows how to dial to an ISP via the AMG1302-T10B
/AMG1202-T10B and then establish a tunnel to a private network. There will
be three items that you need to set up for PPTP application, these are PPTP
server (WinNT), and PPTP client (Win9x) and the AMG1302-T10B
/AMG1202-T10B.
(1) PPTP server setup (WinNT)
 Add the VPN service from Control Panel ->Network
 Add an user account for PPTP logged on user
 Enable RAS port
 Select the network protocols from RAS such as IPX, TCP/IP NetBEUI
 Set the Internet gateway to AMG1302-T10B/AMG1202-T10B.
(2) PPTP client setup (Win9x)
 Add one VPN connection from Dial-Up Networking by entering the
correct username & password and the IP address of the
AMG1302-T10B/AMG1202-T10B's Internet IP address for logging to
NT RAS server.
 Set the Internet gateway to the router that is connecting to ISP
(3) AMG1302-T10B/AMG1202-T10B setup
 Before making a VPN connection from Win9x to WinNT server, you
need to connect AMG1302-T10B/AMG1202-T10B router to your ISP
first.
All contents copyright © 2013 ZyXEL Communications Corporation.
AMG1202-T10B/AMG1302-T10B
Support Notes
51