ZyXEL Communications AMG1202-T10B Support Notes page 44

Introduction
Generally, SUA makes your LAN appear as a single machine to the outside
world. LAN users are invisible to outside users. However, some applications
such as Cu-SeeMe and ICQ will need to connect to the local user behind the
AMG1302-T10B/AMG1202-T10B. In such case, a SUA server must be
configured to forward the incoming packets to the true destination behind SUA.
After the required server are configured in Web Configurator, Advanced Setup,
Network -> NAT -> Port Forwarding, the internal server or client applications
can be accessed by using the AMG1302-T10B/AMG1202-T10B
Address.
SUA Supporting Table
The following are the required Web Configurator, Advanced Setup, Network
-> NAT -> Port Forwarding for the various applications running SUA mode.
ZyXEL SUA Supporting Table
Application
HTTP
FTP
TELNET
POP3
SMTP
mIRC
All contents copyright © 2013 ZyXEL Communications Corporation.
1
Required Settings in Port Forwarding
Port/IP
Outgoing Connection
None
None
None
None
None
None for Chat.
For DCC, please set
Default/Client IP
AMG1202-T10B/AMG1302-T10B
Support Notes
's WAN IP
Incoming
Connection
80/client IP
21/client IP
23/client IP
(and active Telnet
service from WAN)
110/client IP
25/client IP
.
44