Configuring The System - Pentair ScreenLogic BB-HCM311A User And Installation Manual

Step 2: Updating or installing ScreenLogic Connect software on
your PC
ScreenLogic Connect is the program that will allow you to configure and operate
your IntelliTouch pool/spa control system.
1. Connect the Video & Lighting protocol adapter to port 1, 2, 3, or 4 on
your wireless router.
2. Run setup.exe on the installation CD.
3. Follow the prompts to update or install ScreenLogic Connect.
Installing the system for the first time
Have the camera(s) cable(s) ready to connect to the ScreenLogic Video &
Lighting Protocol adapter during the program installation setup. Each camera
must be setup one at a time.
To setup the ScreenLogic Video & Lighting Protocol adapter for the first time:
1. Click the ScreenLogic Connect icon
shown below will be displayed.
Note: The default IP address for the Video & Lighting Protocol adapter
is 192.168.2.3. If necessary, you can view and configure the Video &
Lighting Protocol Adapter IP settings by clicking the "Configure IP Info"
button.
2. Click the Configure ScreenLogic button.
ScreenLogic system
password
ScreenLogic Video &
Lighting Protocol
Adapter IP address
ScreenLogic Video & Lighting Protocol Adapter User's and Installation Guide
on your desktop. The screen
5