10
Installing Lights for the first time
Have the Powerline Interface module ready to connect to COM 1 port on the
ScreenLogic Video & Lighting Protocol adapter during the program installa-
tion setup. Each light switch must be setup one at a time.
WARNING - All switches work must be installed by a licensed
electrician, and must conform to the National Electric Code and all
national, state, and local codes.
To install the PCS Light switches:
Note: PCS light switches are compatible with incondescent light bulbs only. Lights
with florescent light bulbs cannot be used.
1.
Click the ScreenLogic Connect icon
following screen will be displayed.
2.
Be sure that the Video & Lighting adapter is selected and is populated
in the system name field.
3.
Click the
Configure ScreenLogic
button.
System name xx-xx-xx
ScreenLogic system
ScreenLogic Video &
Lighting Protocol
Adapter address
4.
Click the Configure Lighting button
to configure the lights.
ScreenLogic Video & Lighting Protocol Adapter User's and Installation Guide
password
on your desktop. The