Table of Contents
Advertisement
4
~
ON-SCREEN
OPERATION
21
-.
Notes:
If the programme
position number "PR."
displays "--"
Enter the programme
position number the broadcast
channel has been preset to.
That setting will be memorized
and set the next time
that same broadcast
channel is selected.
r
CODE
NUMBER
4;9135-:-
PR. DATE
ON
OFF
m- 23.12
15:00
16:00
SP
AV:OO
SET: O-9
DEL:4
U%ml
When recording from an external source
Press the
O/AV
button twice. The setting under
"PR.''(programme
position) will change to "AV".
If a programme
position number is already
displayed,
first press the cursor (<) button twice.
New Zealand only
Note on sky decoders and recording
*
There are at present two types of sky decoders
available in New Zealand.
1. Base Band Decoder
(no remote control
supplied,
older type).
You cannot successfully
record G-Code
programmed
using this type of decoder.
(Unless your video is modified internally first.)
Contact Sky TV for details.
2.
IRD Decoder
(supplied
with Sky Remote and
with UHF output).
This decoder allows you to programme
recordings
using the G-Code function. You can
use the Sky CODE NUMBERS to record Sky TV
programmed
with your VCR. However, please
note the following limitations.
(a) The Sky CODE NUMBERS used with the
VCR can not change the channels on the Sky
Decoder.
This means you must first preselect the Sky
channel you want to record (movies, sport,
news)
(b) The VCR will then turn on and record the
programme
position which has been set for
Sky. (e.g. programme
position "4").
The Sky channel you record (movies, sport,
news) will depend on which channel the
decoder was left on.
(c) Remember the first time you use a Sky
CODE NUMBER, the programme
position
number
("PR.")
on the video needs to be set
the same for all three Sky channels.
This will depend on the programme position
number you ?Ilocated for Sky in the set up, ie
programme position number
"4",
Advertisement
Table of Contents
