Users Setting; Maintain; Back - Ventus WT816 Manual

4.5.2 DEVICE USER SETTING
Click the "device user settings", as follows:
Can set max three users namely: visitor, operator and administrator
"Visitor":can only view video and switch images;
"OPERATOR":All other permissions in addition to enter the device parameter interface;
"ADMINISTRATOR":With all the permissions settings, can perform all operations;
4.5.3 MAINTENANCE
Click the "maintenance", appears below interface:
Click the "restore factory settings", then reboot back to factory default settings;
Click "reboot" to restart device which will not change the parameters values;
"Upgrade the System Firmware":Upgrade program software of network camera, click "Browse" and find the corresponding system firmware which
already downloaded, then click On upgrade, the upgrade procedure need 60 seconds.
"Upgrade the Application Firmware": Upgrade the application program firmware, click "Browse" and find the corresponding system firmware which
already downloaded, then click On upgrade, the upgrade procedure need 60 seconds.
5Return
Click " " to return to monitor interface.
Figure 4.22
Figure 4.23
19
WT813 / WT816