3.2 Rear Panel
1
2
3
4
No.
Name
1
Fan
2
RF input
3
Local RF input
4
Ground stud
5
Optical input
Optical signal
6
output
7
RS232 interface
8
LAN interface
Switching power
9
supply
3.3 Power Module
3.3.1 220V Power Module
Mounting screws
1
Power switch
4
WT-1550-DM Intelligent Direct Modulated Optical Transmitter
6
5
7
8
Rear Panel schematic diagram
Generally reserved
Used for the connection of device and ground wire
Inserted optical signal input (without inter-cut function, no this port)
This interface is the optical signal output port of the device (If select
inter-cut function, this port is mixed output)
Used for configuring the network management parameters.
Correspond to IEEE802.3 10Base-T, used for network management.
Hot plug
220V/110V power outlet
2
- 6 -
9
9
Remark
Fuse
3